Technical Specifications

Our online design tool allows you to add these units to your room, and will prompt you if we think you need to consider its placement.
Currently, our design tool doesn't automatically add  Number 5 'Robe to Wall Infill panels', which can be purchased separately through the Countertops, Panels and Infills pages of this website, or Wardrobe Interiors, available here.

Take care when designing your Fitted Bedroom Furniture aroudn your bed, to remember the width of the headboard and not just the width of the bed. Sometimes the headboard is wider than the bed itself.

(Click image to enlarge)

In order to facilitate easy planning, design and DIY install, the units in our range of self install Fitted Wardrobe units come in a standard set of widths:

• All Floor units (with the exception of diagonal units), Tallboy and Bridging units come in one of 300mm, 400mm, 500mm, 800mm or 1000mm (bridging unit only).
• Our Single Door Full Height Wardrobes come in 418mm, 468mm or 518mm (and 400mm, 450mm, 500mm respectively for addon units).
• Double Full Height Robes come in 818mm, 918mm and 1018mm for full units (and 800mm, 900mm and 1000mm respectively for addon robes).
• Diagonal corner units, both Wardrobe and Floor Units measure 953mm by 953mm, to fit with the standard unit depth of 592mm.

(Click image to enlarge)

In order to facilitate easy planning, design and DIY install, the units in our range of self install Fitted Wardrobe units come in a standard set of depths:

• All Floor (with the exception of diagonal units) and Tallboy units are 470mm.
• Our full height cabinets and full-depth bridging units are 592mm deep.
• Reduced height bridging units are 384mm deep.
• Diagonal corner units, have identical depth and width so they will match the depth of full-height robes on both walls.
• The depth from the angle to the wall (where the diagonal unit meets the unit next to it) is 592mm.
• The full depth of the diagonal corner units is 953mm.